Francesca Stiedemann IVDroneAlysha Schneider Cooling Fan RaProf. Angeline Glover IIIdiator HDr. Doug Greenholteat DissZackary Beahan DDSJaydon Schadenipation Turbo HuProf. Aletha Jacobi IIrricanChad Cummings IIe CoolerProf. Maximillian Hickle MDDr. Ashton Carter DVM Noise RDr. Orval Padbergeduction Portable Lorna Cummingsfor DJI MAdah Corkeryini 3 Garrett Nicolas VHenri GleichnerPro

(0 Ulasan)
Perkirakan waktu pengiriman: 3 Hari

Dijual oleh:
Nguyễn Xuân Thịnh

Harga:
$16.29 /Pc

Kuantitas:
(4997 tersedia)

Total harga:
Pengembalian dana:
Membagikan:
Dijual oleh
Nguyễn Xuân Thịnh
77 đường số 4 phường bình hưng hoà a quận bình tân tphcm
(0 Ulasan Pelanggan)
Produk terlaris
Feature:
1. Strong Wind & Soft Sound: The fan is 10,000 rpm, the wind is stronger, and the noise is reduced during high-speed operation.
2. Turbine Fuselage Radiator: Heat dissipation is not hot, strong power, speed of 10,000.
3. Three-gear Wind Adjustment: One-button switch, three-gear adjustment. Three-gear wind adjustment lets you control the wind.
4. Overall Temperature Drops by 5~10°: The drone is often troubled by overheating, and it is hot to the hand. Install a cooling fan, and the overall temperature can drop by 5-10 degrees.
5. Quick Disassembly & Assembly: The installation of the radiator does not affect the normal flight and use of the drone, and the installation and the disassembly is fast.


Specification:
Product name: cooling fan
Product material: 3D
Product size: about 88x75x12mm/3.46*2.95*0.47inch
Product net weight: 39.5g
Packing size: about 94*93*36mm/3.70*3.66*1.42inch
Packaging weight (product + packaging): 62.4g
Applicable models: for DJI MINI 3 PRO
Wind speed gear: three gears (slow, medium, fast):
First gear usage time: about 7 hours
Second gear use time: 230 minutes

Third gear use time: 120 minutes

Battery capacity:450mAh

Charging time: 80 minutes
Charging: the red light is on
Full: Green light is on
Working: the blue light is on

Installation Steps:
1. Align the air outlet of the radiator with the two groove air inlets at the bottom of the drone body.
2. Use an O-ring to wrap the radiator around the fuselage to fix the radiator on the drone, that is, the installation is complete.

Note:
The air outlet is aligned with the two notches at the bottom of the fuselage to enter the air.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

Belum ada ulasan untuk produk ini.

Produk-produk terkait

Kueri produk (0)

Masuk or Daftaruntuk mengirimkan pertanyaan Anda kepada penjual

Pertanyaan Lain

Belum ada yang diminta untuk Penjual